Introdução

Your screen might need replacement if there are any noticeable cracks on screen or if you are experiencing persistent flickering during use of your Lenovo IdeaPad Flex4-1130.

Peças

Não são necessárias peças.

Power off your Lenovo Ideapad Flex4-1130 before beginning disassembly.
  • Power off your Lenovo Ideapad Flex4-1130 before beginning disassembly.

  • Remove the ten 4mm screws from the back panel.

Adicionar comentário

Insert the spudger into the groove work your way around the laptop to separate the bottom from the case.
  • Insert the spudger into the groove work your way around the laptop to separate the bottom from the case.

  • Do not insert the spudger too deep! This could potentially damage a device part.

Adicionar comentário

Remove the connector attaching the battery to the motherboard.
  • Remove the connector attaching the battery to the motherboard.

Adicionar comentário

Remove the four 4mm screws on the battery.
  • Remove the four 4mm screws on the battery.

Adicionar comentário

Lift the battery with a spudger and remove.
  • Lift the battery with a spudger and remove.

Adicionar comentário

Remove six 7mm screws. Remove six 7mm screws.
  • Remove six 7mm screws.

Adicionar comentário

Remove two connector cables. Separate the two unhinged parts.
  • Remove two connector cables.

  • Separate the two unhinged parts.

Adicionar comentário

Use the spudger to remove the plastic caps, uncovering the screws underneath.
  • Use the spudger to remove the plastic caps, uncovering the screws underneath.

  • Remove the two 6mm screws.

Adicionar comentário

Use the black nylon spudger to remove the long plastic covering underneath the screen. Remove three 6mm screws.
  • Use the black nylon spudger to remove the long plastic covering underneath the screen.

  • Remove three 6mm screws.

Adicionar comentário

Use the black nylon spudger to lift and separate the screen from the plastic back cover. Use the black nylon spudger to lift and separate the screen from the plastic back cover.
  • Use the black nylon spudger to lift and separate the screen from the plastic back cover.

Adicionar comentário

Peel off tape and remove the cable. Peel off tape and remove the cable.
  • Peel off tape and remove the cable.

Adicionar comentário

Remove the connector chip. Remove the connector chip.
  • Remove the connector chip.

Adicionar comentário

Peel tape and remove cable underneath. Peel tape and remove cable underneath.
  • Peel tape and remove cable underneath.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Adrian Miranda

Member since: 15-02-2018

677 reputação

5 Guides authored

Equipe

USF Tampa, Team S17-G5, Boczar Spring 2018 Membro de USF Tampa, Team S17-G5, Boczar Spring 2018

USFT-BOCZAR-S18S17G5

3 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 6

Últimos 30 dias: 23

Todo: 68