Introdução

Replacing the battery on the Lenovo Ideapad Flex4-1130 is a relatively simple task with minimal risk of damaging the device. The battery might need replacement if your device is unable to remain on for very long even after being fully charged.

Power off your Lenovo Ideapad Flex4-1130 before beginning disassembly.
  • Power off your Lenovo Ideapad Flex4-1130 before beginning disassembly.

  • Remove the ten 4mm screws from the back panel.

Adicionar comentário

Insert the spudger into the groove work your way around the laptop to separate the bottom from the case.
  • Insert the spudger into the groove work your way around the laptop to separate the bottom from the case.

  • Do not insert the spudger too deep! This could potentially damage a device part.

Adicionar comentário

Remove the connector attaching the battery to the motherboard.
  • Remove the connector attaching the battery to the motherboard.

Adicionar comentário

Remove the four 4mm screws on the battery.
  • Remove the four 4mm screws on the battery.

Adicionar comentário

Lift the battery with a spudger and remove.
  • Lift the battery with a spudger and remove.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Adrian Miranda

Member since: 15-02-2018

677 reputação

5 Guides authored

Equipe

USF Tampa, Team S17-G5, Boczar Spring 2018 Membro de USF Tampa, Team S17-G5, Boczar Spring 2018

USFT-BOCZAR-S18S17G5

3 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 3

Últimos 30 dias: 11

Todo: 59