Introdução

This does not require any tools. However, be careful to align the notch in the bottom of the RAM module with the notch in the slot it goes in.

Peças

Não são necessárias peças.

Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.
  • Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.

  • Make sure that the work surface is flat and has nothing sharp on it.

Adicionar comentário

Remove the monitor stand screw in the bottom of the stand, and remove the stand completely. Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.
  • Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.

Adicionar comentário

Remove the two screws on the bottom of the computer, one on each side.
  • Remove the two screws on the bottom of the computer, one on each side.

Adicionar comentário

Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.) Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.) Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.)
  • Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.)

Adicionar comentário

Once it has been separated, lift to remove. Once it has been separated, lift to remove.
  • Once it has been separated, lift to remove.

Adicionar comentário

Remove the four screws that secure the stand arm. Remove the four screws that secure the stand arm.
  • Remove the four screws that secure the stand arm.

Adicionar comentário

Lift up to remove the stand arm. Lift up to remove the stand arm.
  • Lift up to remove the stand arm.

Adicionar comentário

Remove the 5 screws that secure the EMI cover. Remove the cover. Remove the cover.
  • Remove the 5 screws that secure the EMI cover.

  • Remove the cover.

Adicionar comentário

Push the two  retaining clips away from the RAM sticks. Gently lift up the free side of the RAM module and then pull out of the slot.
  • Push the two retaining clips away from the RAM sticks.

  • Gently lift up the free side of the RAM module and then pull out of the slot.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jackson Blake

Member since: 22-01-2018

805 reputação

9 Guides authored

Equipe

Cal Poly, Team S16-G3, Banghart Winter 2018 Membro de Cal Poly, Team S16-G3, Banghart Winter 2018

CPSU-BANGHART-W18S16G3

4 Membros

9 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 16

Todo: 58