Introdução

This requires only a Phillips head screwdriver. Be aware that only 2.5" hard drives fit in this computer.

Peças

Não são necessárias peças.

  1. Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.
    • Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.

    • Make sure that the work surface is flat and has nothing sharp on it.

  2. Remove the monitor stand screw in the bottom of the stand, and remove the stand completely. Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.
    • Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.

  3. Remove the two screws on the bottom of the computer, one on each side.
    • Remove the two screws on the bottom of the computer, one on each side.

  4. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  5. Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.) Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.) Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.)
    • Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.)

  6. Once it has been separated, lift to remove. Once it has been separated, lift to remove.
    • Once it has been separated, lift to remove.

  7. Unscrew the four screws that secure the hard drive enclosure. Unscrew the four screws that secure the hard drive enclosure.
    • Unscrew the four screws that secure the hard drive enclosure.

  8. Unplug the SATA cable. Lift to remove the hard drive enclosure.
    • Unplug the SATA cable. Lift to remove the hard drive enclosure.

  9. Unscrew the four screws that hold hard drive enclosure to the hard drive, located on the side of the enclosure. Unscrew the four screws that hold hard drive enclosure to the hard drive, located on the side of the enclosure.
    • Unscrew the four screws that hold hard drive enclosure to the hard drive, located on the side of the enclosure.

  10. Lift the hard drive up to remove it from the enclosure.
    • Lift the hard drive up to remove it from the enclosure.

Conclusão

To reassemble your device, follow these instructions in reverse order.

5 outras pessoas concluíram este guia.

Jackson Blake

Member since: 22-01-2018

909 reputação

9 Guides authored

Equipe

Cal Poly, Team S16-G3, Banghart Winter 2018 Membro de Cal Poly, Team S16-G3, Banghart Winter 2018

CPSU-BANGHART-W18S16G3

4 Membros

9 Guides authored

you have been busy!!!!! Noticed the solutions , etc. below and that is impressive. chaosone7 @gmail.com

Bobby Kincannon - Responder

It’s nice and easy to get there, unfortunately the board was fried lol.

Charles Allen - Responder

Visualizar Estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 68

Últimos 30 dias: 306

Todo: 1,977