Introdução

This requires a Phillips head screwdriver.

Peças

Não são necessárias peças.

Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.
  • Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.

  • Make sure that the work surface is flat and has nothing sharp on it.

Adicionar comentário

Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.
  • Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.

Adicionar comentário

  • Remove the two screws on the bottom of the computer, one on each side.

Adicionar comentário

  • Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.)

Adicionar comentário

  • Once it has been separated, lift to remove.

Adicionar comentário

  • Remove the four screws that secure the arm stand.

Adicionar comentário

  • Lift up to remove the arm stand.

Adicionar comentário

  • Remove the 5 screws that secure the EMI cover.

  • Remove the cover.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jackson Blake

Member since: 22-01-2018

820 reputação

9 Guides authored

Equipe

Cal Poly, Team S16-G3, Banghart Winter 2018 Membro de Cal Poly, Team S16-G3, Banghart Winter 2018

CPSU-BANGHART-W18S16G3

4 Membros

9 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 10

Todo: 58