Conserte seus objetos Comunidade Loja

Lenovo Flex 3-1120 Speakers Replacement

Introdução

If sound output is distorted, or no sound is coming from your speakers at all, then your speakers may need to be replaced.

O que você precisa

  1. Lenovo Flex 3-1120 Speakers Replacement, Bottom Panel: passo 1, imagem 1 %32

    • Lay the computer down with the bottom panel facing up.

    Editar

  2. Lenovo Flex 3-1120 Speakers Replacement: passo 2, imagem 1 %32 Lenovo Flex 3-1120 Speakers Replacement: passo 2, imagem 2 %32

    • Locate the ten 6mm Phillips screws along the edges and in the center of the back panel.

    • Remove all ten 6mm Phillips screws with a size 0 Phillips screwdriver.

    Editar

  3. Lenovo Flex 3-1120 Speakers Replacement: passo 3, imagem 1 %32

    • Wedge the plastic opening tool into the small space under the back panel.

    • Use the plastic opening tool as a lever to separate the bottom panel from the computer.

    • Slide the tool along the edges of the computer until the bottom panel is completely separated.

    • You may start prying the bottom panel on any edge.

    Editar

  5. Lenovo Flex 3-1120 Speakers Replacement: passo 4, imagem 1 %32

    • Lift the bottom panel off of the computer.

    Editar

  6. Lenovo Flex 3-1120 Speakers Replacement, Speakers: passo 5, imagem 1 %32

    • Locate the speakers at the bottom left and right corners of the computer.

    Editar

  7. Lenovo Flex 3-1120 Speakers Replacement: passo 6, imagem 1 %32 Lenovo Flex 3-1120 Speakers Replacement: passo 6, imagem 2 %32

    • Locate the two 1mm Phillips head screws on both speakers.

    • Remove both screws from each speaker.

    Editar

  8. Lenovo Flex 3-1120 Speakers Replacement: passo 7, imagem 1 %32 Lenovo Flex 3-1120 Speakers Replacement: passo 7, imagem 2 %32

    • Locate where the two speaker wires join at the center of the computer.

    • Follow the wires directly upward to where they connect into the motherboard.

    Editar

  9. Lenovo Flex 3-1120 Speakers Replacement: passo 8, imagem 1 %32

    • Using the spudger, pull the wire down and away from the motherboard to disconnect it.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

Geoff Bentz

Membro desde: 03/09/16

934 Reputação

Autoria de 5 guias

Emblemas: 17

+14 outros emblemas

Equipe

UMass Dartmouth, Team 7-1, Catania Spring 2016 Membro de UMass Dartmouth, Team 7-1, Catania Spring 2016

UMASSD-CATANIA-S16S7G1

Membros da 4

Autoria de 7 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 395