Pular para o conteúdo principal

Introdução

This is a step by step guide on how to remove the fan assembly on the Lenovo Thinkpad Edge E431.

Peças

Nenhum componente especificado.

  1. Close the device and remove all power cables.
    • Close the device and remove all power cables.

    • Lay the laptop flat with the bottom facing upwards.

  2. Remove the four 2mm Phillips #00 screws from the bottom panel.
    • Remove the four 2mm Phillips #00 screws from the bottom panel.

  3. Remove the back panel of the device. Remove the back panel of the device.
    • Remove the back panel of the device.

  4. Remove the nine 2mm Phillips screws from the cooling assembly. Using the tweezers, remove the fan power cable from the motherboard. Using the tweezers, remove the fan power cable from the motherboard.
    • Remove the nine 2mm Phillips screws from the cooling assembly.

    • Using the tweezers, remove the fan power cable from the motherboard.

  5. Lift the fan assembly out of the laptop.
    • Lift the fan assembly out of the laptop.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Nathan Behan

Membro desde: 14-02-2018

381 reputação

3 Guias de autoria

Equipe

USF Tampa, Team S3-G3, Nance Spring 2018 Membro de USF Tampa, Team S3-G3, Nance Spring 2018

USFT-NANCE-S18S3G3

4 Membros

6 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 17

Todo: 299