Pular para o conteúdo principal

Introdução

You will need a screwdriver with a PH000 head, and a prying tool.

  1. Remove the back cover by  prying it open with the metal spudger tool.
    • Remove the back cover by prying it open with the metal spudger tool.

  2. Remove the two screws with a PH000 head screwdriver.
    • Remove the two screws with a PH000 head screwdriver.

    • Keep all your screws in one place.

  3. Remove the metal piece.
    • Remove the metal piece.

    • Keep this piece safe, as you will need it to reassemble the device again.

  4. Remove the battery by lifting it up using a plastic spudger.
    • Remove the battery by lifting it up using a plastic spudger.

  5. Disconnect the cable from the connection.
    • Disconnect the cable from the connection.

    • Be careful not to tear or bend the cable.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Jay Shah

Membro desde: 25-09-2017

343 reputação

2 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 9

Últimos 30 dias: 40

Todo: 635