Conserte seus objetos Comunidade Loja

LaCie Rugged USB-C Circuit Board Replacement

O que você precisa

  1. LaCie Rugged USB-C Circuit Board Replacement, Overview: passo 1, imagem 1 %32 LaCie Rugged USB-C Circuit Board Replacement, Overview: passo 1, imagem 2 %32 LaCie Rugged USB-C Circuit Board Replacement, Overview: passo 1, imagem 3 %32

    • This guide contains steps for the LaCie Rugged USB-C. There is no guarantee that the steps will be the same for different models.

    Editar

  2. LaCie Rugged USB-C Circuit Board Replacement, Case Removal: passo 2, imagem 1 %32 LaCie Rugged USB-C Circuit Board Replacement, Case Removal: passo 2, imagem 2 %32

    • Remove the rubber case around the drive. You can just stretch it off.

    Editar

  3. LaCie Rugged USB-C Circuit Board Replacement, Case Screws: passo 3, imagem 1 %32 LaCie Rugged USB-C Circuit Board Replacement, Case Screws: passo 3, imagem 2 %32

    • Remove these 4x Torx T8 screws

    Editar

  5. LaCie Rugged USB-C Circuit Board Replacement, Case Removal: passo 4, imagem 1 %32 LaCie Rugged USB-C Circuit Board Replacement, Case Removal: passo 4, imagem 2 %32

    • Push on one side of the drive, where the white plastic is. Which side does not matter.

    Editar

  6. LaCie Rugged USB-C Circuit Board Replacement, Preparing for Drive Removal: passo 5, imagem 1 %32 LaCie Rugged USB-C Circuit Board Replacement, Preparing for Drive Removal: passo 5, imagem 2 %32

    • Push GENTLY on the back side of the hard drive.

    • DO NOT push more than is necessary to get the drive above the white plastic, as shown in the second picture.

    Editar

  7. LaCie Rugged USB-C Circuit Board Replacement, Drive Removal: passo 6, imagem 1 %32

    • Pull the drive gently out of the SATA connector.

    Editar

  8. LaCie Rugged USB-C Circuit Board Replacement, Screw Removal: passo 7, imagem 1 %32

    • Remove this Phillips 00 screw from the board.

    Editar

  9. LaCie Rugged USB-C Circuit Board Replacement, Board Removal: passo 8, imagem 1 %32

    • Slide the board out, making sure to keep any foam pieces intact.

    • Do not let any foam pieces get damaged. They are important.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

5 outras pessoas executaram este guia.

Autor(a)

com 1 outro contribuidor

9021007

Membro desde: 07/13/18

4.599 Reputação

Autoria de 25 guias

Emblemas: 22

+19 outros emblemas

3 comentários

Where can i get a new board? thank you

Bar Avraham - Responder

Yes, where can we find a new board?

Vassilis Trigkas - Responder

Right, where can the part be purchased?????

James Causey - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 23

Últimos 30 dias: 70

Duração total: 1,445