Conserte seus objetos

Direito de executar reparos

Loja

LG VX8550 Speaker Replacement

Escrito Por: Nathan Jones (e 3 outros contribuidores)
  • Comentários: 0
  • Favoritos: 0

Dificuldade

Moderado

Passos

12

Tempo necessário

5 minutos

Partes

3

Sinalizadores

1

Action Shots

Fotos de ação

Seja um herói em ação! Este guia precisa de imagens que melhor demonstrem como executar ações específicas.

Introdução

Steps to replace the LG VX8550 speaker

  1. Slide the battery release up.

    • Slide the battery release up.

    Editar

  2. Remove the battery by lifting away from the case.

    • Remove the battery by lifting away from the case.

    Editar

  3. Remove the 2 screw covers next to the rear speaker with a Push Pin.

    • Remove the 2 screw covers next to the rear speaker with a Push Pin.

    Editar

  4. Remove the 4 cover screws with a Philips #00 screwdriver.

    • Remove the 4 cover screws with a Philips #00 screwdriver.

    Editar

  6. Use the iPod opening tool to pry off the back casing.

    • Use the iPod opening tool to pry off the back casing.

    Editar

  7. Continue sliding the iPod opening tool around the seam of the casing to separate the front and back casings.

    • Continue sliding the iPod opening tool around the seam of the casing to separate the front and back casings.

    Editar

  8. Separate the casing halves.

    • Separate the casing halves.

    • Be sure to keep track of the side buttons as they fall out.

    Editar

  9. With the back casing removed the speaker is visible.

    • With the back casing removed the speaker is visible.

    Editar

  10. Lift up under top end of circuit board with the Spludger to access retaining clip.

    • Lift up under top end of circuit board with the Spludger to access retaining clip.

    Editar

  11. Carefully pry up on retaining clip with the Spudger to release the speaker.

    • Carefully pry up on retaining clip with the Spudger to release the speaker.

    Editar

  12. Carefully unplug speaker connector from circuit board with your fingers.

    • Carefully unplug speaker connector from circuit board with your fingers.

    Editar

  13. Remove the speaker by lifting up.

    • Remove the speaker by lifting up.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor

com 3 outros contribuidores

Nathan Jones

Membro desde: 10/04/2010

89 Reputação

10 Guias de autoria

Emblemas: 8

+5 outros emblemas

Equipe

Cal Poly, Team 34-55, Forte Spring 2010 Membro de Cal Poly, Team 34-55, Forte Spring 2010

CPSU-FORTE-S10S34G55

5 Membros

20 Guias de autoria

0 comentários

Adicionar um comentário

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 1,930