Introdução

Phone lacking intelligence? Replace your logic board.

Peças

Não são necessárias peças.

  1. Lay the phone face down with the screen in palm of hand.
    • Lay the phone face down with the screen in palm of hand.

    • Slide the grey button towards the top of the phone.

  2. While the button is slid up grab the battery on the sides and pull up with the bottom remaining in place.
    • While the button is slid up grab the battery on the sides and pull up with the bottom remaining in place.

    • Pull the battery up vertically to completely remove from phone.

    • Remove four screws beneath battery using screw driver.

    • Remove three rubber screw covers with tweezers.

    • Remove the three screws under the covers with the screwdriver.

    • Detach outer casing from back of phone.

    • NOTE: There will be a significant amount of resistance to detaching the back casing.

    • Unsnap gold rectangular plate and silver square plate from the logic board.

    • Remove logic board, being careful not to remove any other pieces.

    • Insert new logic board with white side facing down.

    • NOTE: Make sure side buttons on logic board are correctly aligned to avoid future complications.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Nichole Shaw

Member since: 13-04-2010

1 reputação

7 Guides authored

Equipe

Cal Poly, Team 18-75, Johann Spring 2010 Membro de Cal Poly, Team 18-75, Johann Spring 2010

CPSU-JOHANN-S10S18G75

4 Membros

14 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Todo: 1,237