Introdução

Replace damaged keypad.

Peças

Não são necessárias peças.

  1. Lay the phone face down with the screen in palm of hand.
    • Lay the phone face down with the screen in palm of hand.

    • Slide the grey button towards the top of the phone.

  2. While the button is slid up grab the battery on the sides and pull up with the bottom remaining in place.
    • While the button is slid up grab the battery on the sides and pull up with the bottom remaining in place.

    • Pull the battery up vertically to completely remove from phone.

  3. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  4. Locate four screws underneath of the battery.
    • Locate four screws underneath of the battery.

    • Remove screws by turning counter clockwise with screwdriver until they pop out.

  5. Place fingers on bottom of phone near charger adapter and pry back half of bottom apart.
    • Place fingers on bottom of phone near charger adapter and pry back half of bottom apart.

    • Note: There will be a significant amount of resistance.

  6. Lift up logic board without completely removing from phone.
    • Lift up logic board without completely removing from phone.

    • Remove entire keypad from beneath the logic board.

  7. Insert replacement keypad with buttons aligned in proper holes.
    • Insert replacement keypad with buttons aligned in proper holes.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Nichole Shaw

Member since: 13-04-2010

1 reputação

7 Guides authored

Equipe

Cal Poly, Team 18-75, Johann Spring 2010 Membro de Cal Poly, Team 18-75, Johann Spring 2010

CPSU-JOHANN-S10S18G75

4 Membros

14 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 997