Introdução

A quick guide to removing the front cover of the flip phone.

  1. Turn the phone on its back.
    • Turn the phone on its back.

    Adicionar comentário

  2. Orient the phone as shown.
    • Orient the phone as shown.

    • Remove the battery cover by pushing upward with your thumb.

    Adicionar comentário

    • Place your fingernail at the top of the battery and pry the battery out towards you.

    Adicionar comentário

    • Flip the phone open.

    • Remove the four rubber plugs, located at the corners of the LCD screen, with a push-pin.

    • Use a Phillips #00 screwdriver to remove the four screws located underneath the rubber plugs.

    Adicionar comentário

    • Insert the plastic opening tool in the seam of the top portion of the flip phone.

    • Gently pry the seam open.

    • Move the opening tool around the perimeter of the seam and gently take the front LCD face plate out.

    Adicionar comentário

    • Close the flip phone.

    • Hold the base of the phone and gently remove the faceplate.

    • Place the phone and the faceplate on a clean, flat surface.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Douglas Blaalid

Member since: 13-01-2010

282 reputação

8 Guides authored

Equipe

Cal Poly, Team 4-13, Forte Winter 2010 Membro de Cal Poly, Team 4-13, Forte Winter 2010

CPSU-FORTE-W10S4G13

5 Membros

15 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Todo: 1,834