Introdução

Replacing the speaker.

Turn the closed phone so that the back panel is facing you.
  • Turn the closed phone so that the back panel is facing you.

  • Press down and forward firmly on the gray tab in the middle of the phone.

Adicionar comentário

Now just lift up on the battery and remove it from the phone.
  • Now just lift up on the battery and remove it from the phone.

Adicionar comentário

  • Remove the rubber grommet using a Spudger.

Adicionar comentário

  • Be sure not to lose the screws. They are small!

  • Remove the five screws using a Phillips #00 Screwdriver.

Adicionar comentário

  • When removing back cover, be careful not to break the speaker wires.

  • Using an iPod Opening Tool, carefully pry off the back cover.

  • Using Tweezers, gently pull speaker wires out.

Adicionar comentário

  • Separate the two halves.

Adicionar comentário

  • Take top half of phone and pry up speaker using the Spudger.

Adicionar comentário

  • Lift out speaker.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

David Foster

Member since: 11-04-2010

1 reputação

8 Guides authored

Equipe

Cal Poly, Team 25-88, Amido Spring 2010 Membro de Cal Poly, Team 25-88, Amido Spring 2010

CPSU-AMIDO-S10S25G88

4 Membros

18 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 1,876