Conserte seus objetos Comunidade Loja

LG K7 T-Mobile Rear Phone Camera Replacement

Introdução

Remove the battery before removing the back controls to avoid electric shock. Do not lose any screws or the middle button of the back controls.

O que você precisa

  1. LG K7 T-Mobile Rear Phone Camera Replacement, Battery: passo 1, imagem 1 %32 LG K7 T-Mobile Rear Phone Camera Replacement, Battery: passo 1, imagem 2 %32

    • Flip the LG K7 over so that the back of the phone is facing up.

    • Locate the small notch on the bottom left side of the phone.

    Editar

  2. LG K7 T-Mobile Rear Phone Camera Replacement: passo 2, imagem 1 %32

    • Insert a plastic opening tool into the notch and lift the back cover upward while holding the bottom portion of the phone down to remove it.

    Editar

  4. LG K7 T-Mobile Rear Phone Camera Replacement: passo 3, imagem 1 %32

    • Remove the battery.

    Editar

  5. LG K7 T-Mobile Rear Phone Camera Replacement, Rear Phone Camera: passo 4, imagem 1 %32 LG K7 T-Mobile Rear Phone Camera Replacement, Rear Phone Camera: passo 4, imagem 2 %32

    • Located to nine 3.4 mm screws that keep that keep the phones rear housing in tacked.

    • Using a Phillips 00 screwdriver remove all nine 3.4 mm screws.

    Editar

  6. LG K7 T-Mobile Rear Phone Camera Replacement: passo 5, imagem 1 %32 LG K7 T-Mobile Rear Phone Camera Replacement: passo 5, imagem 2 %32 LG K7 T-Mobile Rear Phone Camera Replacement: passo 5, imagem 3 %32

    • Turn the phone over so the screen is facing up

    • Insert your plastic opening tool between the midframe and front panel assembly on the side of the phone.

    • Slide the plastic opening tool down the seams carefully to separate the screen from the rest of the phone housing.

    Editar

  7. LG K7 T-Mobile Rear Phone Camera Replacement: passo 6, imagem 1 %32 LG K7 T-Mobile Rear Phone Camera Replacement: passo 6, imagem 2 %32 LG K7 T-Mobile Rear Phone Camera Replacement: passo 6, imagem 3 %32

    • Locate the ribbon cable that holds the camera's ribbon cable in place.

    • Carefully remove the camera's ribbon cable from the motherboard using the plastic removal tool.

    • Holding the camera ribbon you just released pull upwards and the camera should release from the case.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 1 outro contribuidor

Salem Jean

Membro desde: 09/28/17

216 Reputação

Autoria de 1 guia

Emblemas: 9

+6 outros emblemas

Equipe

USF Tampa, Team S2-G5, Nance Fall 2017 Membro de USF Tampa, Team S2-G5, Nance Fall 2017

USFT-NANCE-F17S2G5

Membros da 3

Autoria de 8 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 2

Duração total: 526