Introdução

This guide will walk you through with replacing the motherboard of you LG G Vista. You will need tweezers, a Phillips screwdriver #000, and a small plastic spudger, or your thumb nail.

Ferramentas

Não são necessárias ferramentas.

Peças

Não são necessárias peças.

  1. Make sure the device is powered off.
    • Make sure the device is powered off.

    Adicionar comentário

  2. Remove the back cover by gently prying open the case of the device from the charging port.
    • Remove the back cover by gently prying open the case of the device from the charging port.

    Adicionar comentário

    • Lift the battery out of its place by prying up from the small notch at the base of the battery.

    Adicionar comentário

    • Remove the eight 3.0 mm screws using the Phillips #000 screwdriver.

    Adicionar comentário

    • Remove the hard shell covering the motherboard.

    Adicionar comentário

    • Use a pair of tweezers to lift up the white antenna wire. On the other side of the logic board, do the same for the black antenna wire.

    Adicionar comentário

    • Use the tweezers to remove the four connectors as well as the back camera.

    • Be careful not to directly touch the camera lenses.

    Adicionar comentário

    • Lift up and remove the motherboard from the device.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 6

Todo: 145