Introdução

This guide will teach you how to replace the charging dock in your LG G Vista. In this guide you will need tweezers, and a spudger.

  1. Make sure the device is powered off.
    • Make sure the device is powered off.

    Adicionar comentário

  2. Remove the back cover by gently prying open the case of the device from the charging port.
    • Remove the back cover by gently prying open the case of the device from the charging port.

    Adicionar comentário

    • Lift the battery out of its place by prying up from the small notch at the base of the battery.

    Adicionar comentário

    • Using a Phillips #000 screwdriver, remove the eleven 3.0 mm screws around the perimeter of the phone.

    Adicionar comentário

    • Use a plastic spudger, or finger nail, to lift up the hard shell on the top of the phone.

    Adicionar comentário

    • Use a Phillips #000 screwdriver to remove the five 3.0 mm screws.

    • Remove the bottom hard shell from the device.

    Adicionar comentário

    • Using a Phillips #000 screwdriver, remove the two screws from the device.

    Adicionar comentário

    • Using a pair of tweezers, lift up the two antennas surrounding the battery.

    Adicionar comentário

    • Disconnect the two connectors on the right side of the charging port.

    Adicionar comentário

    • Lift up the charging port with the plastic opening tool.

    • Remove the charging port from the device.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 15

Todo: 148