Ir para o conteúdo principal

LG EnV VX9900 Circuit Board and Full Key Board Replacement

O que você precisa

  1. LG EnV VX9900 Circuit Board and Full Key Board Replacement, Battery: passo 1, imagem 1 %32
    • Place the phone so the screen side is facing down.

    • Locate the latch at the end of the phone, opposite of the camera.

  2. LG EnV VX9900 Circuit Board and Full Key Board Replacement: passo 2, imagem 1 %32
    • Push/pull the latch away from the camera, causing the battery to pop out.

  3. LG EnV VX9900 Circuit Board and Full Key Board Replacement: passo 3, imagem 1 %32
    • Remove the battery.

  4. LG EnV VX9900 Circuit Board and Full Key Board Replacement, Circuit Board and Full Key Board: passo 4, imagem 1 %32 LG EnV VX9900 Circuit Board and Full Key Board Replacement, Circuit Board and Full Key Board: passo 4, imagem 2 %32
    • Remove the 5 screw covers on the back of the phone using a Push Pin.

  5. LG EnV VX9900 Circuit Board and Full Key Board Replacement: passo 5, imagem 1 %32
    • With a Phillips #00 Screwdriver, remove the five 3.44 mm screws that were under the screw covers.

    • Also with a Phillips #00 Screwdriver, remove the screw that was revealed once the battery was removed.

  6. LG EnV VX9900 Circuit Board and Full Key Board Replacement: passo 6, imagem 1 %32 LG EnV VX9900 Circuit Board and Full Key Board Replacement: passo 6, imagem 2 %32
    • Open the phone.

  7. LG EnV VX9900 Circuit Board and Full Key Board Replacement: passo 7, imagem 1 %32 LG EnV VX9900 Circuit Board and Full Key Board Replacement: passo 7, imagem 2 %32
    • Starting at the card slot or charger port for greater ease, pry off the colored casing from the back of the phone using the Plastic Pry Tool (or a finger nail may work).

    • Prying open the part just to the left of the right hinge can be difficult.

    • Remove the back colored casing and set it to the side.

  8. LG EnV VX9900 Circuit Board and Full Key Board Replacement: passo 8, imagem 1 %32 LG EnV VX9900 Circuit Board and Full Key Board Replacement: passo 8, imagem 2 %32
    • Gently pry and detach the connection located near the hinge with fingers.

  9. LG EnV VX9900 Circuit Board and Full Key Board Replacement: passo 9, imagem 1 %32 LG EnV VX9900 Circuit Board and Full Key Board Replacement: passo 9, imagem 2 %32
    • The circuit board and the key board will be attached, as shown in the second picture.

    • Lift them both out from the rest of the phone.

    • Do not try to the detach key board pad from the circuit board. They are replaced as a unit.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Equipe

Cal Poly, Team 15-15, Forte Spring 2012 Membro de Cal Poly, Team 15-15, Forte Spring 2012

CPSU-FORTE-S12S15G15

Membros da 5

Autoria de 8 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 14

Duração total: 1,233