Pular para o conteúdo principal

Introdução

How to remove the keypad from an LG CG180 cell phone.

  1. Power down the cell phone by pressing and holding down the red "end call" button.
    • Power down the cell phone by pressing and holding down the red "end call" button.

  2. Turn the phone screen-down so you are looking at the back cover.
    • Turn the phone screen-down so you are looking at the back cover.

  3. Slide the back cover down using your finger to remove the cover from the phone. Slide the back cover down using your finger to remove the cover from the phone.
    • Slide the back cover down using your finger to remove the cover from the phone.

  4. Place your finger at the top of the battery in small gap.
    • Place your finger at the top of the battery in small gap.

  5. kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now

    kits de reparo de baterias de iPhone

    Only $29.99

    Buy Now
  6. Press downward while pulling outward to remove the battery.
    • Press downward while pulling outward to remove the battery.

  7. Remove all four screws on the back of the phone using a Phillips #00 screwdriver.
    • Remove all four screws on the back of the phone using a Phillips #00 screwdriver.

  8. Insert a plastic opening tool in the seam.
    • Insert a plastic opening tool in the seam.

  9. Run the tool along the seam to release all the tabs. Run the tool along the seam to release all the tabs.
    • Run the tool along the seam to release all the tabs.

  10. Pull the phone back cover off once all the tabs are released. Pull the phone back cover off once all the tabs are released.
    • Pull the phone back cover off once all the tabs are released.

  11. Push the contents of the phone away from the hardshell case by applying pressure to the keypad with both thumbs.
    • Push the contents of the phone away from the hardshell case by applying pressure to the keypad with both thumbs.

  12. The hardshell case is separated from the rest of the phone.
    • The hardshell case is separated from the rest of the phone.

  13. Separate keypad from circuit board by turning it upside down and allowing it to fall off. Separate keypad from circuit board by turning it upside down and allowing it to fall off.
    • Separate keypad from circuit board by turning it upside down and allowing it to fall off.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Alex Jacobs

Membro desde: 21-01-2010

5 reputação

4 Guias de autoria

Equipe

Cal Poly, Team 14-42, Regan Winter 2010 Membro de Cal Poly, Team 14-42, Regan Winter 2010

CPSU-REGAN-W10S14G42

4 Membros

10 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 1,319