Ir para o conteúdo principal

Kyocera Zio M6000 Motherboard Replacement

O que você precisa

  1. Kyocera Zio M6000 Motherboard Replacement, Battery: passo 1, imagem 1 %32 Kyocera Zio M6000 Motherboard Replacement, Battery: passo 1, imagem 2 %32
    • Press down on the back of the phone, applying moderate pressure.

    • Slide the back casing down to separate it.

  2. Kyocera Zio M6000 Motherboard Replacement: passo 2, imagem 1 %32 Kyocera Zio M6000 Motherboard Replacement: passo 2, imagem 2 %32
    • Remove the back casing to expose the battery.

    • Use a plastic spudger to lift the battery out using the battery's groove on its top left corner.

  3. Kyocera Zio M6000 Motherboard Replacement, Motherboard: passo 3, imagem 1 %32 Kyocera Zio M6000 Motherboard Replacement, Motherboard: passo 3, imagem 2 %32
    • Remove the six 3.18 mm screws using a Phillips 00 screwdriver.

  4. Kyocera Zio M6000 Motherboard Replacement: passo 4, imagem 1 %32 Kyocera Zio M6000 Motherboard Replacement: passo 4, imagem 2 %32
    • Insert the flat end of the spudger between the front and back panels, and pry it apart by running the spudger along the side to further separate them.

    • Go all the way around, prying as you go, until the back casing completely separates from the rest of the phone.

  5. Kyocera Zio M6000 Motherboard Replacement: passo 5, imagem 1 %32 Kyocera Zio M6000 Motherboard Replacement: passo 5, imagem 2 %32 Kyocera Zio M6000 Motherboard Replacement: passo 5, imagem 3 %32
    • Unclip the two flex cables -- a small one located on the left side on the lower half of the motherboard, and a longer one on the right side, higher up.

  6. Kyocera Zio M6000 Motherboard Replacement: passo 6, imagem 1 %32 Kyocera Zio M6000 Motherboard Replacement: passo 6, imagem 2 %32 Kyocera Zio M6000 Motherboard Replacement: passo 6, imagem 3 %32
    • Pry out the earpiece speaker using the spudger.

    • Pry out the vibration motor using the spudger.

  7. Kyocera Zio M6000 Motherboard Replacement: passo 7, imagem 1 %32 Kyocera Zio M6000 Motherboard Replacement: passo 7, imagem 2 %32
    • Place the flat end of the spudger underneath the digitizer connector and pry it up to disconnect it.

  8. Kyocera Zio M6000 Motherboard Replacement: passo 8, imagem 1 %32 Kyocera Zio M6000 Motherboard Replacement: passo 8, imagem 2 %32 Kyocera Zio M6000 Motherboard Replacement: passo 8, imagem 3 %32
    • Remove the sticker to uncover the screws underneath.

    • Remove the six 1.59 mm screws using a Phillips 00 screwdriver.

  9. Kyocera Zio M6000 Motherboard Replacement: passo 9, imagem 1 %32 Kyocera Zio M6000 Motherboard Replacement: passo 9, imagem 2 %32 Kyocera Zio M6000 Motherboard Replacement: passo 9, imagem 3 %32
    • Lift the bottom portion of the motherboard away from the front panel.

    • Do not forcefully pull the components apart as there is another connector on the underside of the motherboard attaching it to the panel.

    • Insert the flat end of the spudger in between the panel and motherboard to unfasten the connector.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Scott Nguyen

Membro desde: 09/16/15

522 Reputação

Autoria de 3 guias

Equipe

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 4

Duração total: 280