Ir para o conteúdo principal

Kyocera QCP-2035 Display Replacement

O que você precisa

  1. Kyocera QCP-2035 Display Replacement, Remove Back Cover: passo 1, imagem 1 %32 Kyocera QCP-2035 Display Replacement, Remove Back Cover: passo 1, imagem 2 %32 Kyocera QCP-2035 Display Replacement, Remove Back Cover: passo 1, imagem 3 %32
    • When looking at the back of the phone, you will see a horizontal line and three raised segments of plastic in the form of a triangle.

    • Place thumb on top of the triangle and press into the phone while sliding your thumb towards the bottom of the phone.

    • In 5 mm it will stop sliding.

  2. Kyocera QCP-2035 Display Replacement: passo 2, imagem 1 %32 Kyocera QCP-2035 Display Replacement: passo 2, imagem 2 %32 Kyocera QCP-2035 Display Replacement: passo 2, imagem 3 %32
    • Grab the bottom of the back cover with your other hand and pull the cover the rest of the way off.

    • Turn the phone over slowly. The battery will fall out on its own.

  3. Kyocera QCP-2035 Display Replacement: passo 3, imagem 1 %32 Kyocera QCP-2035 Display Replacement: passo 3, imagem 2 %32 Kyocera QCP-2035 Display Replacement: passo 3, imagem 3 %32
    • Rotate the phone so the bottom is facing you. There is a small indent on the plastic face.

    • Using the tip of your fingernail or a spudger, pry the cover away from the rest of the phone.

    • Once the cover starts to part, keep separating until the top notches detach.

  4. Kyocera QCP-2035 Display Replacement: passo 4, imagem 1 %32 Kyocera QCP-2035 Display Replacement: passo 4, imagem 2 %32 Kyocera QCP-2035 Display Replacement: passo 4, imagem 3 %32
    • With the cover plate separated, you will see (6) T6x11mm torx screws recessed in the white plastic.

    • Remove screws.

    • The white plastic face plate lifts right off, exposing the main board.

  5. Kyocera QCP-2035 Display Replacement, Display: passo 5, imagem 1 %32 Kyocera QCP-2035 Display Replacement, Display: passo 5, imagem 2 %32 Kyocera QCP-2035 Display Replacement, Display: passo 5, imagem 3 %32
    • Lift the display straight up, by either grabbing it on it's sides, or sliding a pair of tweezers between the screen and the main board.

    • There are four straight plastic pins on the underside corners of the screen that hold it in place.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Scott Whitney

Membro desde: 01/21/15

301 Reputação

Autoria de 3 guias

Equipe

USF Tampa, Team 5-3, Brown Winter 2015 Membro de USF Tampa, Team 5-3, Brown Winter 2015

USFT-BROWN-W15S5G3

Membros da 4

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 3

Duração total: 175