Ir para o conteúdo principal

Kyocera Hydro Life Rear-Facing Camera Replacement

O que você precisa

  1. Kyocera Hydro Life Rear-Facing Camera Replacement, Rear-Facing Camera: passo 1, imagem 1 %32
    • Flip the phone so that the screen is facing down.

    • Gently remove the back cover with the grip at the bottom of the phone.

  2. Kyocera Hydro Life Rear-Facing Camera Replacement: passo 2, imagem 1 %32 Kyocera Hydro Life Rear-Facing Camera Replacement: passo 2, imagem 2 %32 Kyocera Hydro Life Rear-Facing Camera Replacement: passo 2, imagem 3 %32
    • Use the tab marked "PULL" to remove the battery from its enclosure.

  3. Kyocera Hydro Life Rear-Facing Camera Replacement: passo 3, imagem 1 %32 Kyocera Hydro Life Rear-Facing Camera Replacement: passo 3, imagem 2 %32
    • Remove the six Phillips #00 screws from the back of the enclosure.

    • Use a plastic opening tool to gently remove the plastic piece surrounding the back of the phone enclosure.

  4. Kyocera Hydro Life Rear-Facing Camera Replacement: passo 4, imagem 1 %32
    • Remove the white sticker.

  5. Kyocera Hydro Life Rear-Facing Camera Replacement: passo 5, imagem 1 %32 Kyocera Hydro Life Rear-Facing Camera Replacement: passo 5, imagem 2 %32
    • Using a pair of pliers, gently pry open the camera ribbon slot.

    • This will not take much pressure to open.

  6. Kyocera Hydro Life Rear-Facing Camera Replacement: passo 6, imagem 1 %32
    • Gently remove the camera ribbon.

    • Be very careful not to rip the ribbon. Use tweezers if needed.

  7. Kyocera Hydro Life Rear-Facing Camera Replacement: passo 7, imagem 1 %32 Kyocera Hydro Life Rear-Facing Camera Replacement: passo 7, imagem 2 %32
    • Using a plastic prying tool, gently loosen all 4 corners of the motherboard.

    • Lift the motherboard away from the phone enclosure.

  8. Kyocera Hydro Life Rear-Facing Camera Replacement: passo 8, imagem 1 %32
    • Remove the black sticker.

    • Be careful when removing the sticker. The sticker will need to be replaced after replacing the camera.

  9. Kyocera Hydro Life Rear-Facing Camera Replacement: passo 9, imagem 1 %32
    • Remove the camera from the motherboard.

    • This step requires breaking metal.

    • Only cut along the camera square.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Morgan Marshall

Membro desde: 09/21/18

277 Reputação

Autoria de 2 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 194