Ir para o conteúdo principal

Introdução

This guide will show you how to replace the power button for a Kyocera Hydro Life phone.

  1. Remove the back cover.
    • Remove the back cover.

    • Pry the cover upward from the gap above the charger port as displayed.

  2. Remove the battery.
    • Remove the battery.

  3. Use a PH00 screwdriver to remove the 6 screws from the mid-frame. Removing the screws too carelessly can result in them being damaged or stripped.
    • Use a PH00 screwdriver to remove the 6 screws from the mid-frame.

    • Removing the screws too carelessly can result in them being damaged or stripped.

  4. Remove the back panel trim.
    • Remove the back panel trim.

    • The back panel trim is fairly thin, be cautious when removing it.

  5. Remove the back panel.
    • Remove the back panel.

    • Pry off the 4 corners first.

  6. Remove the power button with the tweezers. Remove the power button with the tweezers.
    • Remove the power button with the tweezers.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Haley Brown

Membro desde: 21/09/2018

183 Reputação

Autoria de 1 guia

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 113