Conserte seus objetos Comunidade Loja

Kurio 10S Speakers Replacement

Introdução

Replacing the speakers can help create better sound quality if there is a problem with sound playing on your device. This guide will walk you through the steps to replace the speakers on your Kurio 10S.

O que você precisa

  1. Kurio 10S Speakers Replacement, Back Cover: passo 1, imagem 1 %32

    • Turn the device over and place it with the screen down on a flat surface that is clean so the screen does not get scratched.

    Editar

  2. Kurio 10S Speakers Replacement: passo 2, imagem 1 %32 Kurio 10S Speakers Replacement: passo 2, imagem 2 %32

    • Locate the four screws, two on each side.

    • Using the philips head screwdriver, carefully remove each screw and keep them together in a safe location.

    Editar

  3. Kurio 10S Speakers Replacement: passo 3, imagem 1 %32

    • Once all screws are removed, use a spudger to get under a corner and unclip the hooks.

    • Once the spudger is under the cover, slide it all the way around the device, pushing lightly into the device making sure it stays under the cover until all the clips are removed.

    • The back cover is difficult to remove, so do not be afraid of using some force once all of the clips have been removed.

    Editar

  5. Kurio 10S Speakers Replacement: passo 4, imagem 1 %32

    • The back cover should then be able to easily be removed from the device and you should see the battery and other internal components.

    Editar

  6. Kurio 10S Speakers Replacement, Speakers: passo 5, imagem 1 %32

    • Locate the two speakers on either side of the device

    Editar

  7. Kurio 10S Speakers Replacement: passo 6, imagem 1 %32 Kurio 10S Speakers Replacement: passo 6, imagem 2 %32

    • Carefully disconnect the black and red wire from the motherboard using tweezers

    • Caution: motherboard parts are very fragile, so be careful when removing the wires

    Editar

  8. Kurio 10S Speakers Replacement: passo 7, imagem 1 %32

    • Remove the speaker from its holder.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 2 outros contribuidores

Hanna Desilets

Membro desde: 03/25/15

122 Reputação

Autoria de 1 guia

Emblemas: 4

+1 outro emblema

Equipe

UMass Dartmouth, Team 1-6, Shastany Spring 2015 Membro de UMass Dartmouth, Team 1-6, Shastany Spring 2015

UMASSD-SHASTANY-S15S1G6

Membros da 4

Autoria de 8 guias

Um comentário

This tutorial was veryhelpful

Ralph Watson - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 2

Duração total: 223