Ir para o conteúdo principal

Koosh Vortex Tornado Barrel Shield Spring Replacement

O que você precisa

  1. Koosh Vortex Tornado Barrel Shield Spring Replacement, Barrel Shield Spring: passo 1, imagem 1 %32
    • Remove the fourteen 15 mm Phillips #1 screws on the side of the body.

  2. Koosh Vortex Tornado Barrel Shield Spring Replacement: passo 2, imagem 1 %32
    • Pull the halves of the toy gun apart to show the inside. Set the left half aside (all of the inside components are on the right half).

  3. Koosh Vortex Tornado Barrel Shield Spring Replacement: passo 3, imagem 1 %32
    • Using a spudger, unhook the barrel shield's spring from the right half of the toy gun. One side should still be connected to the shield barrel shield.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Jordon Roseman

Membro desde: 02/16/16

155 Reputação

Autoria de 1 guia

Equipe

IUPUI, Team 2-4, Harley Spring 2016 Membro de IUPUI, Team 2-4, Harley Spring 2016

IUPUI-HARLEY-S16S2G4

Membros da 4

Autoria de 3 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 193