Introdução

The rubber grip, located on the front of your Kodak PixPro AZ251, gives you a better grip of the camera. This guide will instruct you on how to remove the rubber pad.

Peças

Não são necessárias peças.

Slide switch to open lock position. Slide switch to open lock position.
  • Slide switch to open lock position.

Adicionar comentário

Press down on the battery cover and slide outwards to open. Press down on the battery cover and slide outwards to open.
  • Press down on the battery cover and slide outwards to open.

Adicionar comentário

Remove the batteries.
  • Remove the batteries.

Adicionar comentário

Insert the plastic opening tool underneath the rubber on the bottom corner.
  • Insert the plastic opening tool underneath the rubber on the bottom corner.

Adicionar comentário

Slide the plastic opening tool along the perimeter of the rubber grip to unbind the glue. Slide the plastic opening tool along the perimeter of the rubber grip to unbind the glue. Slide the plastic opening tool along the perimeter of the rubber grip to unbind the glue.
  • Slide the plastic opening tool along the perimeter of the rubber grip to unbind the glue.

Adicionar comentário

Pry upwards until you can grip the rubber enough to pull off. Pry upwards until you can grip the rubber enough to pull off. Pry upwards until you can grip the rubber enough to pull off.
  • Pry upwards until you can grip the rubber enough to pull off.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Luiza Oliveira

Member since: 22-02-2018

205 reputação

2 Guides authored

Equipe

USF Tampa, Team S1-G1, Cagle Spring 2018 Membro de USF Tampa, Team S1-G1, Cagle Spring 2018

USFT-CAGLE-S18S1G1

4 Membros

7 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 9

Todo: 26