Introdução

This tutorial demonstrates how to remove the back cover from the camera.

Peças

Não são necessárias peças.

Begin by sliding the switch towards the open symbol. Release your finger from the switch and the battery case will pop open. Begin by sliding the switch towards the open symbol. Release your finger from the switch and the battery case will pop open.
  • Begin by sliding the switch towards the open symbol. Release your finger from the switch and the battery case will pop open.

Adicionar comentário

Next, press down on the red lever which holds the battery in place.
  • Next, press down on the red lever which holds the battery in place.

Adicionar comentário

Once the battery has popped out of the compartment, simply pull it out of the camera. Once the battery has popped out of the compartment, simply pull it out of the camera.
  • Once the battery has popped out of the compartment, simply pull it out of the camera.

Adicionar comentário

Make sure that the lens cover is on the Kodak EasyShare whenever working with one of these guides. Also, make sure to keep track of the screws you remove throughout these step by step guides. Losing a screw could inhibit the ability to reassemble the camera. Begin by removing the first screw located on the back of the camera.
  • Make sure that the lens cover is on the Kodak EasyShare whenever working with one of these guides.

  • Also, make sure to keep track of the screws you remove throughout these step by step guides. Losing a screw could inhibit the ability to reassemble the camera.

  • Begin by removing the first screw located on the back of the camera.

Adicionar comentário

Next, remove the two screws located on the right side of the camera. Next, remove the two screws located on the right side of the camera.
  • Next, remove the two screws located on the right side of the camera.

Adicionar comentário

After removing the screws located on the right side, remove the six screws located on the bottom of the camera. After removing the screws located on the right side, remove the six screws located on the bottom of the camera.
  • After removing the screws located on the right side, remove the six screws located on the bottom of the camera.

Adicionar comentário

Lastly, remove the two screws located on the left side of the camera. Lastly, remove the two screws located on the left side of the camera.
  • Lastly, remove the two screws located on the left side of the camera.

Adicionar comentário

Once all eleven screws have been removed, use Plastic Opening Tools to take off the back cover. Insert the plastic opening tool and apply leverage on each side of the camera. The recommended spots to apply leverage are shown in these pictures. Insert the plastic opening tool and apply leverage on each side of the camera. The recommended spots to apply leverage are shown in these pictures.
  • Once all eleven screws have been removed, use Plastic Opening Tools to take off the back cover.

    • Insert the plastic opening tool and apply leverage on each side of the camera. The recommended spots to apply leverage are shown in these pictures.

Adicionar comentário

Apply pressure on the left and right side of the camera and pull the back cover away from the device. Once the back cover has been successfully removed, you should have a total of eleven screws as well as the bottom cover separated from the camera. Once the back cover has been successfully removed, you should have a total of eleven screws as well as the bottom cover separated from the camera.
  • Apply pressure on the left and right side of the camera and pull the back cover away from the device.

  • Once the back cover has been successfully removed, you should have a total of eleven screws as well as the bottom cover separated from the camera.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

katie newman

Member since: 28-10-2010

30 reputação

3 Guides authored

Equipe

Cal Poly, Team 5-16, Maness Fall 2010 Membro de Cal Poly, Team 5-16, Maness Fall 2010

CPSU-MANESS-F10S5G16

4 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 1,152