Peças

Não são necessárias peças.

  1. Place thumb firmly on battery cover. Slide thumb right, the cover should follow and pop up.
    • Place thumb firmly on battery cover.

    • Slide thumb right, the cover should follow and pop up.

  2. Place thumb on orange tab and pull back towards screen. The battery should pop up.
    • Place thumb on orange tab and pull back towards screen.

    • The battery should pop up.

    • Gently lift battery out.

  3. Remove screws from along outer edge of casing. There are 6 screws in total. Righty tighty, lefty loosey!
    • Remove screws from along outer edge of casing.

    • There are 6 screws in total.

    • Righty tighty, lefty loosey!

  4. Free shipping on all orders over US$100 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  5. Gently lift off front and back casing. Gently lift off front and back casing. Gently lift off front and back casing.
    • Gently lift off front and back casing.

  6. Remove screws along side. Gently peel off side casing. Gently peel off side casing.
    • Remove screws along side.

    • Gently peel off side casing.

  7. Remove screws from front silver panel. Remove screws from front silver panel. Remove screws from front silver panel.
    • Remove screws from front silver panel.

  8. Lift up ribbon cable fastener with blue plastic opening tool. Gently pull out lens. Gently pull out lens.
    • Lift up ribbon cable fastener with blue plastic opening tool.

    • Gently pull out lens.

  9. To place new lens, peel off silver tape before inserting ribbon cable into proper slot.
    • To place new lens, peel off silver tape before inserting ribbon cable into proper slot.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Brian

Member since: 13-03-2014

252 reputação

2 Guides authored

Equipe

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Todo: 156