Introdução

Replace unusable or damaged button.

Peças

Não são necessárias peças.

  1. Open the battery cover.
    • Open the battery cover.

  2. Slide the orange latch sideways to eject the battery.
    • Slide the orange latch sideways to eject the battery.

    • Remove the battery.

    • Remove 7 screws.

      • 1 (6.25 mm) screw located on the top right corner, next to the view screen.

      • 4 (4.45mm) screws on the bottom of the camera.

      • 2 (2.95mm) screws on the left side of the camera.

    • There will be 2 (5.39mm) screws. Remove the screws in order to remove the lanyard.

    • Remove the rear camera casing.

    • Remove the front casing.

    • Remove the top panel screw (1x 4.37mm).

    • Remove the top panel.

    • Remove the back panel screws (1x 3.33mm, and 1x 3.40mm).

    • Separate the inner casing from the tripod mount.

    • Gently pull the orange tab out of the circuit board.

    • Carefully flip the LCD panel to expose the central circuit board.

    • Remove the (1x 3.33mm) screw from the menu button panel .

    • Pull the second orange tab from the circuit board and remove the buttons.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Michael

Member since: 24-06-2010

63 reputação

2 Guides authored

Equipe

Cal Poly, Team 2-8, Johann Summer 2010 Membro de Cal Poly, Team 2-8, Johann Summer 2010

CPSU-JOHANN-R10S2G8

5 Membros

8 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 1,203