Introdução

How to remove the buttons.

Peças

Não são necessárias peças.

  1. Position the camera with the bottom facing up. With your finger, slide the battery cover in the direction of open arrow. The battery cover will spring open, so be careful to lift it up gently.
    • Position the camera with the bottom facing up.

    • With your finger, slide the battery cover in the direction of open arrow.

    • The battery cover will spring open, so be careful to lift it up gently.

  2. Use a Phillips #00 screwdriver to remove the seven 4.5mm screws. There are 2 on the left There are 2 on the right
    • Use a Phillips #00 screwdriver to remove the seven 4.5mm screws.

    • There are 2 on the left

    • There are 2 on the right

    • There are 3 on the bottom

  3. Free shipping on all orders over US$100 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  4. Firmly grasp and pull back casing off. Firmly grasp and pull back casing off. Firmly grasp and pull back casing off.
    • Firmly grasp and pull back casing off.

  5. Use #00 screwdriver to pry off buttons. Use #00 screwdriver to pry off buttons. Use #00 screwdriver to pry off buttons.
    • Use #00 screwdriver to pry off buttons.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Alan Galarza

Member since: 03-10-2010

69 reputação

3 Guides authored

Equipe

Cal Poly, Team 7-51, Amido Fall 2010 Membro de Cal Poly, Team 7-51, Amido Fall 2010

CPSU-AMIDO-F10S7G51

4 Membros

7 Guides authored

Thank you this was very helpful!

carolnelson - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 2

Todo: 1,180