Introdução

Use this guide to remove the back case.

Peças

Não são necessárias peças.

Position the camera with the bottom facing up.
  • Position the camera with the bottom facing up.

  • With your finger, slide the battery cover in the direction of open arrow.

  • The battery cover will spring open, so be careful to lift it up gently.

Adicionar comentário

Use a Phillips #00 screwdriver to remove the seven 4.5mm screws.
  • Use a Phillips #00 screwdriver to remove the seven 4.5mm screws.

    • There are 2 on the left

    • There are 2 on the right

    • There are 3 on the bottom

Adicionar comentário

  • Firmly grasp and pull back casing off.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Dustin Rodgers

Member since: 05-10-2010

50 reputação

4 Guides authored

Equipe

Cal Poly, Team 7-51, Amido Fall 2010 Membro de Cal Poly, Team 7-51, Amido Fall 2010

CPSU-AMIDO-F10S7G51

4 Membros

7 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Todo: 1,386