Ir para o conteúdo principal

KitchenAid KSM150PSER Circuit Board Replacement

O que você precisa

  1. KitchenAid KSM150PSER Circuit Board Replacement, Circuit Board: passo 1, imagem 1 %32 KitchenAid KSM150PSER Circuit Board Replacement, Circuit Board: passo 1, imagem 2 %32
    • Using a Phillips #2 screwdriver, remove the 10mm screw on the back cover by rotating it counterclockwise.

    • The back cover is now free. Remove it by pulling it back and up.

    • Ensure that the mixer is disconnected from any electrical source prior to removing the back cover.

  2. KitchenAid KSM150PSER Circuit Board Replacement: passo 2, imagem 1 %32 KitchenAid KSM150PSER Circuit Board Replacement: passo 2, imagem 2 %32
    • Using a Phillips #1 screwdriver, remove the 9.5mm screw above the circuit board by rotating it counterclockwise.

    • If you can't see the screw, try pulling the seal down past the wires to make the screw more accessible.

  3. KitchenAid KSM150PSER Circuit Board Replacement: passo 3, imagem 1 %32 KitchenAid KSM150PSER Circuit Board Replacement: passo 3, imagem 2 %32
    • Using pliers or tweezers, remove the connectors of the four wires attached to the circuit board.

  4. KitchenAid KSM150PSER Circuit Board Replacement: passo 4, imagem 1 %32
    • Grab the wires and tilt the edge of the board up to lift the circuit board up and out.

Conclusão

To reassemble your device, follow these instructions in reverse order.

4 outras pessoas executaram este guia.

Luke Leonard

Membro desde: 01/24/18

562 Reputação

Autoria de 2 guias

Equipe

Cal Poly, Team S2-G5, Livingston Winter 2018 Membro de Cal Poly, Team S2-G5, Livingston Winter 2018

CPSU-LIVINGSTON-W18S2G5

Membros da 4

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 6

Últimos 30 dias: 35

Duração total: 5,211