Conserte seus objetos Comunidade Loja

Kingston HyperX Cloud II Speaker Wire Repair

Introdução

If your Kingston HyperX Cloud II speaker is having connection issues, use this guide to reconnect your speaker wire to the driver. The blue and green wires are the wires that must be soldered to fix the speaker feedback for the speakers to be repaired. This problem occurs when the wires get disconnected from the speaker or stop working from natural causes.

O que você precisa

  1. Kingston HyperX Cloud II Speaker Wire Repair, Kingston HyperX Cloud II Speaker Wire Repair: passo 1, imagem 1 %32

    • Pulling along the edges, take off the ear padding.

    Editar

  2. Kingston HyperX Cloud II Speaker Wire Repair: passo 2, imagem 1 %32 Kingston HyperX Cloud II Speaker Wire Repair: passo 2, imagem 2 %32

    • Use a Phillips #0 screwdriver to remove the two 11 mm screws from the bracket support.

    Editar

  3. Kingston HyperX Cloud II Speaker Wire Repair: passo 3, imagem 1 %32 Kingston HyperX Cloud II Speaker Wire Repair: passo 3, imagem 2 %32 Kingston HyperX Cloud II Speaker Wire Repair: passo 3, imagem 3 %32

    • Remove the inside bracket support, and then remove the outside bracket support.

    • Expand and remove the microphone speaker from the frame.

    Editar

  5. Kingston HyperX Cloud II Speaker Wire Repair: passo 4, imagem 1 %32 Kingston HyperX Cloud II Speaker Wire Repair: passo 4, imagem 2 %32 Kingston HyperX Cloud II Speaker Wire Repair: passo 4, imagem 3 %32

    • Use a Phillips #1 screwdriver to remove the two 7.90 mm screws from the red support attached to the microphone speaker.

    Editar

  6. Kingston HyperX Cloud II Speaker Wire Repair: passo 5, imagem 1 %32 Kingston HyperX Cloud II Speaker Wire Repair: passo 5, imagem 2 %32 Kingston HyperX Cloud II Speaker Wire Repair: passo 5, imagem 3 %32

    • Separate the red frame support from the microphone speaker by putting it to the side.

    Editar

  7. Kingston HyperX Cloud II Speaker Wire Repair: passo 6, imagem 1 %32 Kingston HyperX Cloud II Speaker Wire Repair: passo 6, imagem 2 %32

    • Remove the four 11 mm screws on the speaker frame with a Phillips #2 screwdriver.

    Editar

  8. Kingston HyperX Cloud II Speaker Wire Repair: passo 7, imagem 1 %32 Kingston HyperX Cloud II Speaker Wire Repair: passo 7, imagem 2 %32 Kingston HyperX Cloud II Speaker Wire Repair: passo 7, imagem 3 %32

    • Remove the headphone speaker frame.

    • Solder the detached blue wire onto the driver.

    • Be cautious not to solder the wrong wire.

    Editar

  9. Kingston HyperX Cloud II Speaker Wire Repair: passo 8, imagem 1 %32

    • Solder the green wire onto the driver.

    • Be cautious not to solder the wrong wire.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 3 outros contribuidores

Daniel Olaoluwa Ajagbonna

Membro desde: 03/27/23

325 Reputação

Autoria de 2 guias

Emblemas: 7

+4 outros emblemas

Equipe

IUPUI, Team 1-4, Harley Spring 2023 Membro de IUPUI, Team 1-4, Harley Spring 2023

IUPUI-HARLEY-S23S1G4

Membros da 3

Autoria de 3 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 30

Últimos 30 dias: 117

Duração total: 1,773