Ir para o conteúdo principal

Kindle Fire HDX 7" Rear Panel Replacement

O que você precisa

  1. Kindle Fire HDX 7" Rear Panel Replacement, Speaker Bezel: passo 1, imagem 1 %32 Kindle Fire HDX 7" Rear Panel Replacement, Speaker Bezel: passo 1, imagem 2 %32 Kindle Fire HDX 7" Rear Panel Replacement, Speaker Bezel: passo 1, imagem 3 %32
    • Insert an opening pick underneath the speaker bezel, and slide it along the perimeter to separate it from the tablet.

    • The adhesive is strong and may require an iOpener, or heat gun, to soften.

  2. Kindle Fire HDX 7" Rear Panel Replacement: passo 2, imagem 1 %32
    • Remove the speaker bezel.

  3. Kindle Fire HDX 7" Rear Panel Replacement, Rear Panel: passo 3, imagem 1 %32
    • Remove the six pink 3mm T3 Torx screws from the back case.

  4. Kindle Fire HDX 7" Rear Panel Replacement: passo 4, imagem 1 %32 Kindle Fire HDX 7" Rear Panel Replacement: passo 4, imagem 2 %32
    • Wedge opening picks around the perimeter between the display and back case.

    • Work the opening picks around the perimeter until the two halves disengage from each other.

    • Don't completely separate as the display ribbon cable still connects the two.

  5. Kindle Fire HDX 7" Rear Panel Replacement: passo 5, imagem 1 %32
    • Use the flat end of a spudger to pry up and disconnect the rear panel press-fit connector from the motherboard.

    • There may be a glue strip between the battery and the outside case. Gently pry the case open and use the flat end of a spudger to separate the glue strip.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Blake Klein

Membro desde: 01/29/17

70.356 Reputação

Autoria de 50 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 6

Duração total: 522