Ir para o conteúdo principal

Kid Galaxy Morphibians Explorer Axle Replacement

O que você precisa

  1. Kid Galaxy Morphibians Explorer Axle Replacement, Axle: passo 1, imagem 1 %32
    • Remove both 8.0 mm Phillips #1 screws, one for each wheel.

  2. Kid Galaxy Morphibians Explorer Axle Replacement: passo 2, imagem 1 %32
    • Remove the wheels by pulling them away from the RC car.

  3. Kid Galaxy Morphibians Explorer Axle Replacement: passo 3, imagem 1 %32
    • Make note of where each driving gear cover is placed. They only go in one way.

    • Remove the eight 8.0mm Phillips #00 screws, two screws for each wheel.

  4. Kid Galaxy Morphibians Explorer Axle Replacement: passo 4, imagem 1 %32
    • Pry open the two gear covers on both sides.

  5. Kid Galaxy Morphibians Explorer Axle Replacement: passo 5, imagem 1 %32
    • Pull the driving gears off the axles by sliding them off the axles and exposing both axles.

  6. Kid Galaxy Morphibians Explorer Axle Replacement: passo 6, imagem 1 %32
    • Slide both axles from the internal axles guides within the car.

    • Reverse the steps to replace the axles.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Rusbell Gonzalez

Membro desde: 09/17/14

219 Reputação

Autoria de 5 guias

Equipe

USF Tampa, Team 1-2, Hickman Fall 2014 Membro de USF Tampa, Team 1-2, Hickman Fall 2014

USFT-HICKMAN-F14S1G2

Membros da 3

Autoria de 7 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 269