Conserte seus objetos Comunidade Loja

Keyboard

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

O que você precisa

  1. Keyboard, key removal: passo 1, imagem 1 %32 Keyboard, key removal: passo 1, imagem 2 %32 Keyboard, key removal: passo 1, imagem 3 %32

    • To get to the screws beneath the keyboard you need to take some keys off. You can use either an opening tool or an opening pick. The first picture shows how it should look like with all the necessary keys off (12 in total).

    • The four longer keys from the fingerboard are to be handled from the left side to get them off.

    • The eight smaller keys need to be levered from the bottom up.

    Editar

  3. Keyboard, removing scissors mechanisms: passo 2, imagem 1 %32 Keyboard, removing scissors mechanisms: passo 2, imagem 2 %32

    • The scissor mechanism of the eight small keys are obstructing the underlying screws.

    • By using again an opening tool or opening pick these can be snapped off easily.

    • When reassembling be sure to place them in with the correct side facing upwards.

    Editar

  4. Keyboard, unscrew keyboard: passo 3, imagem 1 %32 Keyboard, unscrew keyboard: passo 3, imagem 2 %32 Keyboard, unscrew keyboard: passo 3, imagem 3 %32

    • Loosen those 12 screws with a Phillips #00 screwdriver.

    • Then just pull off the four rotary knobs and the volume knob.

    • Now it is possible to slightly lift the keyboard and set it back.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 1 outro contribuidor

Tobias Isakeit

Membro desde: 03/31/14

117.238 Reputação

Autoria de 188 guias

Emblemas: 46

+43 outros emblemas

Equipe

Master Techs Membro de Master Techs

Community

Membros da 322

Autoria de 2.520 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 662