Ir para o conteúdo principal

Keurig K40 Top Water Pump Replacement

O que você precisa

  1. Keurig K40 Top Water Pump Replacement, Top Water Pump: passo 1, imagem 1 %32
    • Begin by removing the top cover from the device.

    • Remove the cover by gently rocking it back and forth with an emphasis on lowering the left side underneath an internal peg.

  2. Keurig K40 Top Water Pump Replacement: passo 2, imagem 1 %32
    • Unscrew both 1.5mm screws located on the water pump.

  3. Keurig K40 Top Water Pump Replacement: passo 3, imagem 1 %32 Keurig K40 Top Water Pump Replacement: passo 3, imagem 2 %32
    • Keeping one hand firmly placed on the device, tug upwards on the water pump until it is separated from the device.

    • The water pump and pipe should now be loose and easy to move as shown.

  4. Keurig K40 Top Water Pump Replacement: passo 4, imagem 1 %32 Keurig K40 Top Water Pump Replacement: passo 4, imagem 2 %32
    • Pull on the point where the pipe meets the water pump.

    • The pipe will come loose and the water filter will be free and ready to be replaced.

Conclusão

To reassemble your device, follow these instructions in reverse order.

5 outras pessoas executaram este guia.

Equipe

USF Tampa, Team 6-1, Eyestone Spring 2016 Membro de USF Tampa, Team 6-1, Eyestone Spring 2016

USFT-EYESTONE-S16S6G1

Membros da 3

Autoria de 5 guias

4 comentários

I NEED ONE OF THESE! Where can I find one????

G Steve - Responder

This is a check valve, not the water pump.

Rick Koen - Responder

Please rename this article. The item is not a water pump.

tvyse46 - Responder

I viewed this to replace the pump. But after the checkvalve was replaced through these instructions my K40 works like new. Thank you.

Glenn Stanley - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 12

Últimos 30 dias: 51

Duração total: 9,400