Conserte seus objetos Comunidade Loja

Kenwood DNX571HD CD/DVD Drive Replacement

Introdução

If the CD/DVD drive in your Kenwood DNX571HD car stereo has stopped working, or has physically broken, follow this guide to remove the module and replace it with a new one.

O que você precisa

  1. Kenwood DNX571HD CD/DVD Drive Replacement, CD/DVD Drive: passo 1, imagem 1 %32 Kenwood DNX571HD CD/DVD Drive Replacement, CD/DVD Drive: passo 1, imagem 2 %32

    • Unscrew the four 3.5mm side screws with a Phillips #1 screwdriver.

    • There are two screws per side.

    Editar

  2. Kenwood DNX571HD CD/DVD Drive Replacement: passo 2, imagem 1 %32 Kenwood DNX571HD CD/DVD Drive Replacement: passo 2, imagem 2 %32 Kenwood DNX571HD CD/DVD Drive Replacement: passo 2, imagem 3 %32

    • Use a spudger to unhook the plastic clips on the sides and top of the front panel. There are two clips on each side and one clip on the top.

    • Place the spudger between the plastic tab and the metal case and gently lift the spudger away from the case.

    Editar

  4. Kenwood DNX571HD CD/DVD Drive Replacement: passo 3, imagem 1 %32

    • Pull the top of the front panel out and down to remove front panel.

    • Remove the front panel gently so as not to damage the ribbon cables behind it.

    Editar

  5. Kenwood DNX571HD CD/DVD Drive Replacement: passo 4, imagem 1 %32 Kenwood DNX571HD CD/DVD Drive Replacement: passo 4, imagem 2 %32 Kenwood DNX571HD CD/DVD Drive Replacement: passo 4, imagem 3 %32

    • Unscrew the three 5mm screws from the top of the device using a Phillips #1 screwdriver.

    • Lift up to remove the top casing.

    Editar

  6. Kenwood DNX571HD CD/DVD Drive Replacement: passo 5, imagem 1 %32

    • Lift the CD drive carefully to expose the attached cable underneath.

    Editar

  7. Kenwood DNX571HD CD/DVD Drive Replacement: passo 6, imagem 1 %32 Kenwood DNX571HD CD/DVD Drive Replacement: passo 6, imagem 2 %32

    • Flip up the black clasp with a spudger to disconnect the large white ribbon cable connecting the CD drive to the board underneath.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 4 outros contribuidores

Wendy Zaballos

Membro desde: 09/17/18

952 Reputação

Autoria de 6 guias

Emblemas: 8

+5 outros emblemas

Equipe

Washington State, Team S1-G1, Hope Fall 2018 Membro de Washington State, Team S1-G1, Hope Fall 2018

WSU-HOPE-F18S1G1

Membros da 4

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 9

Duração total: 1,063