Introdução

Use this guide to replace a worn drive belt in a Kenmore 110 Series Washing Machine.

Peças

Não são necessárias peças.

To avoid risk of electric shock, unplug the washing machine.
  • To avoid risk of electric shock, unplug the washing machine.

  • Lay the washing machine on its back.

Adicionar comentário

Using a 5/16" socket wrench, remove both screws from the belt cover. Remove the belt cover from the washer. Remove the belt cover from the washer.
  • Using a 5/16" socket wrench, remove both screws from the belt cover.

  • Remove the belt cover from the washer.

Adicionar comentário

Using a 1/2" socket, remove the bolt securing the drive pulley. Remove the drive pulley and belt. When installing a new belt, wrap the belt around both the motor and drive pulleys before reinstalling the drive pulley.
  • Using a 1/2" socket, remove the bolt securing the drive pulley.

  • Remove the drive pulley and belt.

  • When installing a new belt, wrap the belt around both the motor and drive pulleys before reinstalling the drive pulley.

I have difficulty to remove the bolt suring the pulley. Is there any tricky to move the bolt?

John Wang - Responder

need to remove shaft off pulley

Valery Ryz -

I have a very old Kenmore Washer. The belt is loose but not broken. How do I tighten?

teedle54 - Responder

Conclusão

To reassemble your device, follow these instructions in reverse order.

7 outras pessoas concluíram este guia.

Robert Trout

Member since: 26-09-2012

742 reputação

5 Guides authored

Equipe

Cal Poly, Team 15-43, Forte Fall 2012 Membro de Cal Poly, Team 15-43, Forte Fall 2012

CPSU-FORTE-F12S15G43

5 Membros

5 Guides authored

What would be reason that rinse cycle doesn't spin and it leaks

lauraleahenquinette - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 38

Últimos 7 dias: 229

Últimos 30 dias: 1,171

Todo: 66,705