Conserte seus objetos Comunidade Loja

Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement

Introdução

Replacement of the LCD board on any Kaffelogic Nano or Nucleus Link coffee roaster with a D or P prefix serial number.

O que você precisa

  1. Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Removing Front Panel Screws: passo 1, imagem 1 %32 Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Removing Front Panel Screws: passo 1, imagem 2 %32

    • Remove the 6x 2.5mm Hex screws on the left and right side of the roaster.

    • Take care not to damage the buttons while maneuvering the front panel, with all six screws removed it may fall away.

    Editar

  2. Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Lift the closure: passo 2, imagem 1 %32 Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Lift the closure: passo 2, imagem 2 %32

    • Hold the front panel steady while removing the plastic top/closure.

    Editar

  3. Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Removing the front panel: passo 3, imagem 1 %32

    • Pull away the front panel carefully.

    Editar

  5. Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Removing the rear panel: passo 4, imagem 1 %32 Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Removing the rear panel: passo 4, imagem 2 %32 Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Removing the rear panel: passo 4, imagem 3 %32

    • Remove the last 2.5mm Hex screw securing the rear panel.

    • Pull up on the rear panel to remove it from the roaster.

    Editar

  6. Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Access granted: passo 5, imagem 1 %32 Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Access granted: passo 5, imagem 2 %32

    • Set the panels aside somewhere safe and bask in the beauty of your naked roaster.

    Editar

  7. Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Remove ribbon cable: passo 6, imagem 1 %32 Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Remove ribbon cable: passo 6, imagem 2 %32 Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Remove ribbon cable: passo 6, imagem 3 %32

    • Gently remove the ribbon cable from the PCB.

    Editar

  8. Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Remove PCB screws: passo 7, imagem 1 %32 Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Remove PCB screws: passo 7, imagem 2 %32 Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Remove PCB screws: passo 7, imagem 3 %32

    • Unscrew the 4x PH2 PCB screws.

    • These screws are captive to the PCB.

    Editar

  9. Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Remove PCB: passo 8, imagem 1 %32 Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Remove PCB: passo 8, imagem 2 %32 Kaffelogic Nano 7/LINK (D-P Serial) LCD Board Replacement, Remove PCB: passo 8, imagem 3 %32

    • Carefully remove the display PCB.

    • You may replace the ribbon cable while you have the panels off.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

Kaffelogic

Membro desde: 07/23/25

2.098 Reputação

Autoria de 18 guias

Emblemas: 5

+2 outros emblemas

Equipe

Kaffelogic Staff Membro de Kaffelogic Staff

Community

3 Membros

Autoria de 18 guias

0Comentários do guia

Comentar

Visualizações:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 9

Ao todo: 50