Conserte seus objetos Comunidade Loja

KYVOL CYBOVAC E20 Main Brush Replacement

Introdução

The Kyvol Cybovac E20 has a main rolling brush that may stop functioning over time from use. The brush should be taken out and cleaned, but if this does not work, the brush may be broken. If your vacuum is not cleaning well, use this guide to replace a broken main brush.

  1. KYVOL CYBOVAC E20 Main Brush Replacement, Main Brush: passo 1, imagem 1 %32

    • Turn vacuum off and lay on flat surface.

    Editar

  2. KYVOL CYBOVAC E20 Main Brush Replacement: passo 2, imagem 1 %32 KYVOL CYBOVAC E20 Main Brush Replacement: passo 2, imagem 2 %32

    • Turn vacuum over and identify the main brush compartment.

    Editar

  4. KYVOL CYBOVAC E20 Main Brush Replacement: passo 3, imagem 1 %32

    • Take off the orange cover guarding the brush

    Editar

  5. KYVOL CYBOVAC E20 Main Brush Replacement: passo 4, imagem 1 %32

    • Remove the main brush from the vacuum by pulling it out.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

Hailee Ledgerwood

Membro desde: 02/09/23

109 Reputação

Autoria de 1 guia

Emblemas: 3

Equipe

University of North Texas, Team 2-5, Saru Jimmy Spring 2023 Membro de University of North Texas, Team 2-5, Saru Jimmy Spring 2023

UNT-SARU JIMMY-S23S2G5

Membros da 4

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 7

Duração total: 139