Ir para o conteúdo principal

Jura Capresso IMPRESSA J5 opening procedure

O que você precisa

  1. Jura Capresso IMPRESSA J5  opening procedure, Jura Capresso IMPRESSA J5  opening procedure: passo 1, imagem 1 %32
    • Unplug the power cord!

    • Remove the water tank and the drip tray. Remove all coffee beans from the storage container.

  2. Jura Capresso IMPRESSA J5  opening procedure: passo 2, imagem 1 %32 Jura Capresso IMPRESSA J5  opening procedure: passo 2, imagem 2 %32 Jura Capresso IMPRESSA J5  opening procedure: passo 2, imagem 3 %32
    • Flip open the lid of the bean compartment.

    • Unscrew the two slotted screws inside the bean compartment. The screws have a rubber washer and will not come out completely.

    • Remove the bean compartment.

  3. Jura Capresso IMPRESSA J5  opening procedure: passo 3, imagem 1 %32 Jura Capresso IMPRESSA J5  opening procedure: passo 3, imagem 2 %32 Jura Capresso IMPRESSA J5  opening procedure: passo 3, imagem 3 %32
    Ferramenta utilizada nesse passo:
    iFixit Precision 4 mm Screwdriver Bit
    $2.99
    Comprar
    • The top cover is fastened with oval head screws. Unscrew them.

    • These screws have an oval head that makes them look like rivets (picture 2). You need to use a special bit - also available at iFixit - for their removal. Here a DIY guide. If the right bit is not available, it could be done with a pair of needle nose pliers. Jura wants to keep us out of our own machines!!!

  4. Jura Capresso IMPRESSA J5  opening procedure: passo 4, imagem 1 %32
    • Also remove the two oval head screws underneath the ground coffee compartment lid.

  5. Jura Capresso IMPRESSA J5  opening procedure: passo 5, imagem 1 %32
    • Now you can pry up the top cover all around.

    • Remove the top cover. This often requires a little force.

    • Use plastic tools to avoid scratching your device.

  6. Jura Capresso IMPRESSA J5  opening procedure: passo 6, imagem 1 %32 Jura Capresso IMPRESSA J5  opening procedure: passo 6, imagem 2 %32
    • Turn the device with the back facing you.

    • Turn the Jura label a few degrees counterclockwise. If it's hard to do, use a small suction cup.

    • Remove the Jura label.

  7. Jura Capresso IMPRESSA J5  opening procedure: passo 7, imagem 1 %32 Jura Capresso IMPRESSA J5  opening procedure: passo 7, imagem 2 %32 Jura Capresso IMPRESSA J5  opening procedure: passo 7, imagem 3 %32
    • Underneath the label you will find two Torx T15 screws. Remove them.

    • Carefully pull the top of the chrome cover slightly outwards, then push it down and put it aside.

  8. Jura Capresso IMPRESSA J5  opening procedure: passo 8, imagem 1 %32
    • Remove the Torx T15 screw on the side panel with the water tank.

  9. Jura Capresso IMPRESSA J5  opening procedure: passo 9, imagem 1 %32 Jura Capresso IMPRESSA J5  opening procedure: passo 9, imagem 2 %32
    • Pull the right side panel slightly towards the back.

    • Remove the side panel.

  10. Jura Capresso IMPRESSA J5  opening procedure: passo 10, imagem 1 %32
    • Pull the left side panel slightly towards the back and remove it.

Conclusão

Follow the steps in reverse order to reassemble your device.

2 outras pessoas executaram este guia.

Um agradecimento especial a esses tradutores:

de en

100%

Estes tradutores estão nos ajudando a consertar o mundo! Quer contribuir?
Comece a traduzir ›

VauWeh

Membro desde: 10/19/15

199.709 Reputação

Autoria de 246 guias

Equipe

Repair is War on Entropy Membro de Repair is War on Entropy

Community

Membros da 24

Autoria de 1.084 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 12

Últimos 30 dias: 43

Duração total: 4,317