Conserte seus objetos Comunidade Loja

JBL Pulse 3 Speaker Grill Replacement

Introdução

The speaker grill is the small, circular, mess looking piece on the bottom of the JBL Pulse 3. It is often the first component you have to take off to get to other components on the JBL Pulse 3. For further information regarding troubleshooting, please visit our Troubleshooting Page.

O que você precisa

  1. JBL Pulse 3 Speaker Grill Replacement, Speaker Grill: passo 1, imagem 1 %32

    • Lay the JBL Pulse 3 on its side as shown in the picture.

    • Use a plastic opening tool to lift the top right corner of the speaker grill. A small amount of force is necessary to remove the grill.

    Editar

  2. JBL Pulse 3 Speaker Grill Replacement: passo 2, imagem 1 %32

    • Repeat step 1 for bottom right corner of speaker grill.

    Editar

  4. JBL Pulse 3 Speaker Grill Replacement: passo 3, imagem 1 %32 JBL Pulse 3 Speaker Grill Replacement: passo 3, imagem 2 %32

    • After pulling the right side of the grill off, place thumb underneath grill as shown in the picture.

    • Lift and pull straight out to pull grill off the posts.

    Editar

    • Repeat steps 1-3 for the left side of the speaker grill on the JBL Pulse 3. The speaker grill should now be completely removed from the JBL Pulse 3.

    Editar
Conclusão

To reassemble your device, follow the instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 12

Duração total: 914