Ir para o conteúdo principal

JBL L26 Speaker Replacement

O que você precisa

  1. JBL L26 Speaker Replacement, Speaker: passo 1, imagem 1 %32
    • Remove the four 6.4 mm Phillips #2 screws from the front of the speaker.

  2. JBL L26 Speaker Replacement: passo 2, imagem 1 %32
    • Pull the speaker out of the frame and lay it onto the side.

  3. JBL L26 Speaker Replacement: passo 3, imagem 1 %32
    • Unlatch the green wire by pulling on the terminal connector and not the wire.

  4. JBL L26 Speaker Replacement: passo 4, imagem 1 %32 JBL L26 Speaker Replacement: passo 4, imagem 2 %32
    • Use a small prying tool to pry the terminal connector off of the tap.

    • After you unlatched both edges, pull the black wire out.

  5. JBL L26 Speaker Replacement: passo 5, imagem 1 %32
    • Get your replacement speaker and connect the green wire by pushing the terminal connector onto the tap.

  6. JBL L26 Speaker Replacement: passo 6, imagem 1 %32 JBL L26 Speaker Replacement: passo 6, imagem 2 %32
    • Connect the black wire by attaching the terminal connector onto the tap.

    • Use a clamping tool to clip the edges toward the tap.

    • Be careful not to clamp too hard so you don't damage the tap.

  7. JBL L26 Speaker Replacement: passo 7, imagem 1 %32
    • Place the new speaker onto the frame and screw the four 6.4 mm Phillips #2 screws back in.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Nathnael Dubale

Membro desde: 09/20/20

269 Reputação

Autoria de 1 guia

Equipe

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 22

Duração total: 1,027