Conserte seus objetos Comunidade Loja

JBL Everest Elite 300 Headphone Jack Replacement

Introdução

Headphones not connecting to the auxiliary? This may be caused by the headphone jack. Here's a guide to replace it. All you will need is a Phillips #00 screwdriver, a soldering iron, and an iFixit opening tool.

O que você precisa

  1. JBL Everest Elite 300 Headphone Jack Replacement, Speaker: passo 1, imagem 1 %32

    • Remove the ear pad with an opening pick.

    Editar

  2. JBL Everest Elite 300 Headphone Jack Replacement: passo 2, imagem 1 %32

    • Reveal the speaker.

    Editar

  4. JBL Everest Elite 300 Headphone Jack Replacement: passo 3, imagem 1 %32

    • Remove the 4.5 mm screws using the Phillips #00 screwdriver.

    Editar

  5. JBL Everest Elite 300 Headphone Jack Replacement: passo 4, imagem 1 %32

    • Pull apart the bronze speaker away from the headphones carefully to reveal the wiring.

    • Desolder the motherboard speaker connection.

    Editar

  6. JBL Everest Elite 300 Headphone Jack Replacement, Headphone Jack: passo 5, imagem 1 %32

    • Unscrew the circuit board connected to the headphone jack.

    Editar

  7. JBL Everest Elite 300 Headphone Jack Replacement: passo 6, imagem 1 %32

    • Desolder the cables connecting the headphone jack board to the headphones.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 5

Duração total: 49