Conserte seus objetos Comunidade Loja

JBL Charge 2 Speakers Replacement

Introdução

How to disassemble the JBL Charge 2 for replacing speakers.

O que você precisa

  1. JBL Charge 2 Speakers Replacement, Battery: passo 1, imagem 1 %32

    • Remove the screen cover from the speaker using a metal spudger.

    Editar

  2. JBL Charge 2 Speakers Replacement: passo 2, imagem 1 %32 JBL Charge 2 Speakers Replacement: passo 2, imagem 2 %32

    • Using a Phillips #1 screwdriver (PH1), remove the (4) four 8mm screws.

    • Remove the end cap of the device. Repeat the same process to remove the other end cap.

    Editar

  3. JBL Charge 2 Speakers Replacement: passo 3, imagem 1 %32 JBL Charge 2 Speakers Replacement: passo 3, imagem 2 %32

    • To remove the end diaphragms, use a Phillips #1 screwdriver (PH1) and remove the (4) four 6mm screws.

    • Twist off the end cap and remove them from the device.

    Editar

  5. JBL Charge 2 Speakers Replacement: passo 4, imagem 1 %32 JBL Charge 2 Speakers Replacement: passo 4, imagem 2 %32

    • Use a Phillips #1 screwdriver (PH1) to remove the (2) two screws from the battery cover.

    • Pry away the plastic battery cover with a plastic spudger.

    Editar

  6. JBL Charge 2 Speakers Replacement: passo 5, imagem 1 %32

    • Disconnect the battery connector with a plastic opening tool and wiggle the connector free.

    Editar

  7. JBL Charge 2 Speakers Replacement: passo 6, imagem 1 %32 JBL Charge 2 Speakers Replacement: passo 6, imagem 2 %32 JBL Charge 2 Speakers Replacement: passo 6, imagem 3 %32

    • Scrape the battery wire sealant off with a plastic opening tool, and ensure it is free of the body of the speaker and wires.

    • Slide the battery free.

    Editar

  8. JBL Charge 2 Speakers Replacement, Speakers: passo 7, imagem 1 %32

    • Remove the opposite screen cover using a metal spudger

    Editar

  9. JBL Charge 2 Speakers Replacement: passo 8, imagem 1 %32

    • Use the Phillips #1 screwdriver (PH1) to remove the (8) eight screws.

    • Pull out the speakers from the device.

    Editar

  10. JBL Charge 2 Speakers Replacement: passo 9, imagem 1 %32

    • Disconnect the wiring from the speaker by using the fine tip pry tool.

    • Remove the speakers from the device.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Autor(a)

com 4 outros contribuidores

Mauzor Ilonzo

Membro desde: 09/26/17

495 Reputação

Autoria de 3 guias

Emblemas: 11

+8 outros emblemas

Equipe

USF Tampa, Team S2-G4, Passmore Fall 2017 Membro de USF Tampa, Team S2-G4, Passmore Fall 2017

USFT-PASSMORE-F17S2G4

Membros da 4

Autoria de 8 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 8

Últimos 30 dias: 41

Duração total: 4,533