Conserte seus objetos Comunidade Loja

JBL Charge 2 Battery Replacement

Introdução

How to disassemble the JBL Charge 2 for a battery replacement.

O que você precisa

  1. JBL Charge 2 Battery Replacement, Battery: passo 1, imagem 1 %32

    • Remove the screen cover from the speaker using a metal spudger.

    Editar

  2. JBL Charge 2 Battery Replacement: passo 2, imagem 1 %32 JBL Charge 2 Battery Replacement: passo 2, imagem 2 %32

    • Using a Phillips #1 screwdriver (PH1), remove the (4) four 8mm screws.

    • Remove the end cap of the device. Repeat the same process to remove the other end cap.

    Editar

  4. JBL Charge 2 Battery Replacement: passo 3, imagem 1 %32 JBL Charge 2 Battery Replacement: passo 3, imagem 2 %32

    • To remove the end diaphragms, use a Phillips #1 screwdriver (PH1) and remove the (4) four 6mm screws.

    • Twist off the end cap and remove them from the device.

    Editar

  5. JBL Charge 2 Battery Replacement: passo 4, imagem 1 %32 JBL Charge 2 Battery Replacement: passo 4, imagem 2 %32

    • Use a Phillips #1 screwdriver (PH1) to remove the (2) two screws from the battery cover.

    • Pry away the plastic battery cover with a plastic spudger.

    Editar

  6. JBL Charge 2 Battery Replacement: passo 5, imagem 1 %32

    • Disconnect the battery connector with a plastic opening tool and wiggle the connector free.

    Editar

  7. JBL Charge 2 Battery Replacement: passo 6, imagem 1 %32 JBL Charge 2 Battery Replacement: passo 6, imagem 2 %32 JBL Charge 2 Battery Replacement: passo 6, imagem 3 %32

    • Scrape the battery wire sealant off with a plastic opening tool, and ensure it is free of the body of the speaker and wires.

    • Slide the battery free.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

10 outras pessoas executaram este guia.

Autor(a)

com 5 outros contribuidores

Mauzor Ilonzo

Membro desde: 09/26/17

495 Reputação

Autoria de 3 guias

Emblemas: 11

+8 outros emblemas

Equipe

USF Tampa, Team S2-G4, Passmore Fall 2017 Membro de USF Tampa, Team S2-G4, Passmore Fall 2017

USFT-PASSMORE-F17S2G4

Membros da 4

Autoria de 8 guias

3 comentários

Thanks for the manual! Easy repair this way.

Jeroen Cox - Responder

The JBL Charge 2 I have only needs the rear screen to be taken off. Once removed, just unscrew the battery holder plate. No need to unscrew the bass speakers. The battery plate is pretty well protected against water entering. You have to remove some silicone caulking to take out the power plug. My speaker takes the “New” Charge 2 battery.

Rogelio Fernandez - Responder

Could you please suggest me where to buy battery for JBL Charge 2. Iam from Visakhapatnam, India. My mail vasudev.chiratla@gmail.com.

Vasudev Chiratla -

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 8

Últimos 7 dias: 56

Últimos 30 dias: 232

Duração total: 19,442