Conserte seus objetos Comunidade Loja

Ivation IVWPDC20Y Motherboard Replacement

Introdução

Use this guide when you need to replace the motherboard.

O que você precisa

  1. Ivation IVWPDC20Y Motherboard Replacement, Motherboard: passo 1, imagem 1 %32

    • With the H2.0 bit screwdriver, remove the two screws on the yellow waterproof cover

    Editar

  2. Ivation IVWPDC20Y Motherboard Replacement: passo 2, imagem 1 %32

    • Apply a plastic opening tool to each of the corners and gently remove the casing

    • The front casing is held down by adhesive and may require additional work to remove

    • Apply just enough force to undo the inner latches to make sure not to damage the waterproof seal

    Editar

  3. Ivation IVWPDC20Y Motherboard Replacement: passo 3, imagem 1 %32

    • Remove the five silver screws from the inner casing using the PH00 screwdriver bit

    Editar

  4. Ivation IVWPDC20Y Motherboard Replacement: passo 4, imagem 1 %32

    • Remove the six screws from the edge of the clear inner casing with the PH00 screwdriver bit

    • These screws are very small and easy to strip so apply consistent pressure when removing them

    Editar

  5. Ivation IVWPDC20Y Motherboard Replacement: passo 5, imagem 1 %32

    • Pry off back outer casing using the black spudger or the blue prying tools

    Editar

  6. Ivation IVWPDC20Y Motherboard Replacement: passo 6, imagem 1 %32

    • Carefully remove the screen from the silver casing using a prying tool or the black spudger

    • There is adhesive in the center of the screen, be sure not to bend it when applying pressure

    Editar

  7. Ivation IVWPDC20Y Motherboard Replacement: passo 7, imagem 1 %32

    • Gently push out the pins holding the orange tape down using the pointy end of the spudger

    • Screen and orange tape should slip out as a whole

    Editar

  9. Ivation IVWPDC20Y Motherboard Replacement: passo 8, imagem 1 %32

    • Remove three screws holding the silver screen casing to the motherboard using the PH00 bit screwdriver

    Editar

  10. Ivation IVWPDC20Y Motherboard Replacement: passo 9, imagem 1 %32

    • Remove three screws holding the motherboard into the casing using the PH00 bit screwdriver bit

    Editar

  11. Ivation IVWPDC20Y Motherboard Replacement: passo 10, imagem 1 %32

    • Gently lift the corner of the motherboard out

    • Everything should come out as one component free of the casing

    Editar

  12. Ivation IVWPDC20Y Motherboard Replacement: passo 11, imagem 1 %32

    • Remove the soldering on the three wires holding the flash bulb

    • The wires are different colors: red, white, and black

    Editar

  13. Ivation IVWPDC20Y Motherboard Replacement: passo 12, imagem 1 %32

    • Remove the two screws holding the lens assembly to the motherboard using the PH00 bit screwdriver

    Editar

  14. Ivation IVWPDC20Y Motherboard Replacement: passo 13, imagem 1 %32

    • Remove the soldering on the 3 wires that are connected to the lens unit

    Editar

  15. Ivation IVWPDC20Y Motherboard Replacement: passo 14, imagem 1 %32

    • Remove the three screws holding the button sensors to the battery casing using the PH00 screwdriver bit

    Editar

  16. Ivation IVWPDC20Y Motherboard Replacement: passo 15, imagem 1 %32

    • Remove soldering on the grouping of wires connecting the button sensors

    Editar

  17. Ivation IVWPDC20Y Motherboard Replacement: passo 16, imagem 1 %32

    • Lift screen to reveal wires underneath

    • Remove soldering connecting screen to the motherboard

    Editar

  18. Ivation IVWPDC20Y Motherboard Replacement: passo 17, imagem 1 %32

    • Gently pull orange tape from the motherboard

    Editar

  19. Ivation IVWPDC20Y Motherboard Replacement: passo 18, imagem 1 %32

    • Remove soldering from the two green wires connected to the motherboard

    Editar

  20. Ivation IVWPDC20Y Motherboard Replacement: passo 19, imagem 1 %32

    • Gently bend the capacitor upwards

    • Remove soldering from the two connectors

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 2 outros contribuidores

Wendy Jones

Membro desde: 02/06/16

225 Reputação

Autoria de 2 guias

Emblemas: 10

+7 outros emblemas

Equipe

USF Tampa, Team 6-6, Eyestone Spring 2016 Membro de USF Tampa, Team 6-6, Eyestone Spring 2016

USFT-EYESTONE-S16S6G6

Membros da 3

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 5

Últimos 30 dias: 5

Duração total: 421