Ir para o conteúdo principal

Iomega Z100S2 Case Replacement

O que você precisa

  1. Iomega Z100S2 Case Replacement, Case: passo 1, imagem 1 %32 Iomega Z100S2 Case Replacement, Case: passo 1, imagem 2 %32
    • Push in the plastic tab that can be seen through cracks in the front left corner using a spudger.

  2. Iomega Z100S2 Case Replacement: passo 2, imagem 1 %32
    • Move down the same side and push in the plastic tab.

  3. Iomega Z100S2 Case Replacement: passo 3, imagem 1 %32
    • Move to the front right side and once again push in the plastic tab.

    • There is not a fourth tab to push in after this one.

  4. Iomega Z100S2 Case Replacement: passo 4, imagem 1 %32 Iomega Z100S2 Case Replacement: passo 4, imagem 2 %32
    • Grab the cover by the front side and pull upwards.

    • You might encounter some resistance. Pull firmly, but don't yank it.

  5. Iomega Z100S2 Case Replacement: passo 5, imagem 1 %32 Iomega Z100S2 Case Replacement: passo 5, imagem 2 %32
    • Tilt the front case down until the pegs detach from the bottom of the case.

    • Lift up and outward.

    • The motherboard will be loose at this point.

Conclusão

To reassemble your device, follow these instructions in reverse order.

5 outras pessoas executaram este guia.

Chris Rudolph

Membro desde: 10/05/10

82 Reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 7-53, Amido Fall 2010 Membro de Cal Poly, Team 7-53, Amido Fall 2010

CPSU-AMIDO-F10S7G53

Membros da 4

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 6

Duração total: 4,120