Peças

Não são necessárias peças.

  1. Disconnect the phone cord from the handset jack.
    • Disconnect the phone cord from the handset jack.

  2. Unscrew the two black screws (8 mm long) located in the middle of the handset using #1 Phillips head. Unscrew the two black screws (8 mm long) located in the middle of the handset using #1 Phillips head.
    • Unscrew the two black screws (8 mm long) located in the middle of the handset using #1 Phillips head.

  3. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  4. Pry the back cover off the headset using a spudger. It is best to pry at the top of the handset. Pry the back cover off the headset using a spudger. It is best to pry at the top of the handset.
    • Pry the back cover off the headset using a spudger. It is best to pry at the top of the handset.

  5. While holding the handset front cover, grasp and twist the handset microphone and jack until they come free from the cover.
    • While holding the handset front cover, grasp and twist the handset microphone and jack until they come free from the cover.

  6. Unscrew the 2 screws (8 mm long) that hold the receiver in place using a #1 Phillips screwdriver. Note: The screws come with washers. Note: The screws come with washers.
    • Unscrew the 2 screws (8 mm long) that hold the receiver in place using a #1 Phillips screwdriver.

    • Note: The screws come with washers.

  7. Pull the red and green wires that connect the receiver to the microphone out from under the metal piece and black padding. Note: To insert the wires back underneath the black padding, pull the black padding back with your finger and use plastic opening tool to wedge the wires underneath the black padding.
    • Pull the red and green wires that connect the receiver to the microphone out from under the metal piece and black padding.

    • Note: To insert the wires back underneath the black padding, pull the black padding back with your finger and use plastic opening tool to wedge the wires underneath the black padding.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Juan David GutierrezFranco

Member since: 20-01-2012

67 reputação

4 Guides authored

Equipe

Cal Poly, Team 11-24, Maness Winter 2012 Membro de Cal Poly, Team 11-24, Maness Winter 2012

CPSU-MANESS-W12S11G24

4 Membros

7 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 874